AFT132

is a medium composite friction ideal for general purpose  applications. It is available in fully or semi-cured sheets. Forms to diameters from 10" (1/8" to 1/4" thickness only) and up to 112" (1/8" to2"). It has a higher fiberglass content and alternate resin allows for more different wear pattern for tight diameter applications. We can do special projects and will work in integral molded (bonded directly to steel). Bondable and Machinable.

Available Standard Sizes     
 Sheet Stock     
  Sheet Size - Available in many sizes  
  Thickness- .125" to 3"   
 Arced (Drum Diameter) Parameters   
  3/8" to 1/2" thick - 35" and up Drum Diameter 
  1/8" to 1/4" thick - 10" and up Drum Diameter 

 CTI has the ability to do special molds and laminated semi-cured slabs to make thicker, tighter drum parts.  Contact our sales department for more information [email protected].
 
 Properties      
 Coefficient of Friction - .40 typ - GG   
 Tensile Strength - 2310 psi    
 Flexural Strength - 5445 psi    
 Compression Strength - 20,150 psi   
 Direct Shear Strength - 4175 psi 

Suggested Operating Limits     
 Max Pressure - 300 psi    
 Max Surface Speed - 5000 ft/min   
 Max Intermittent Temp - 650°F    
 Max Sustained Temp - 550°F    

Current Applications:     
 Wiper End Blocks     
 Agricultural Equipment Clutch Discs   
 Tear Drop Blocks     
 Paper Winder Pads     
 Construction Crane Linings
 Industrial Brake Linings    
 Disc Brake Pads     
 Winch Bearings
Clutch facings
Centrifical clutches w or w/o backing plates

AFT 132 is part of the AFT100 series - what follows is the SDS for AFT100

Your browser does not support viewing this document. Click here to download the document.