AFT1011

is a graphite-based brake and clutch friction composite, especially designed to run against copper, where it exhibits excellent coefficient stability and fade resistance.  It is also recommended for use against quality cast iron and steel surfaces where low coefficients are required.  AFT1011 may be machined using industry-accepted practices.

Available Standard Sizes     
 Sheet Stock     
  Sheet Size - Available in many sizes
  Thickness- .125" to 3"   
        
Properties      
 Coefficient of Friction - .32 typ - GG   
 Tensile Strength - 2350 psi    
 Flexual Strength - 5200 psi    
 Compression Strength - 13,400 psi   
 Direct Shear Stength - 4800 psi    
        

Suggested Operating Limits     
 Max Pressure - 300 psi    
 Max Surface Speed - 5000 ft/min   
 Max Intermittent Temp - 650°F    
 Max Sustained Temp - 500°F    
        
Current Applications:    
Industrial Brake Linings 
 Friction Dampers     
 Paper Winder Brake Pads    
 Water Cooled Friction Discs    
 Friction Discs  & Pucks

Your browser does not support viewing this document. Click here to download the document.